Bottom-up modelling using finished components - Or any combination of these modelling methods
FUNCTIONS - Sub-assemblies-parts- standard library products.
It supports all the capabilities of 3D solids and surface modelling that have become the standard among medium-level CAD/CAM programs, including these ones
Intuitive creation of new geometry and importing and manipulation of surfaces
Associative settings for element parameters
Boolean operators for generating a typically shaped elements; functions include union, intersection, and subtraction
Advanced surface and shape modelling for designing complex, ergonomic, and easy to use industrial products; functions include point grids, by network of curves, ruled surfaces, extrusions, lofted surfaces, swept surfaces, and revolutions
Construction of auxiliary lines and planes, and spatial curves, including broken lines, splines, and spirals
Addition of structural elements, such as chamfers, fillets, holes, stiffness elements, and thin-walled shells
Creation of any shape of arrays and assembly components
Component modelling with assemblies with relative positioning of parts in assemblies
Constraints for mating assembly components, including automatic constraints for faster assembly creation - Special tools to simplify work with large assemblies
Flexible parts and assembly editing, including characteristic points
Redetermination of the parameters of any element at any design stage causes a reconstruction of the whole model.
Effective mould design with pattern drafts, joint lines, cavities defined by part shape, and shrinkage allowance.
Capable sheet metal modelling through sheet body creation, bends, holes, louver, fillets, punching (stamping) and cutting, cap closing, sheet metal unwrapping, and associative drawings of unwrapped sheet metal.
Inserting standards products into the model from a library, generating user model libraries - Efficient collision detection of parts
KOMPAS-Graphic- Included in KOMPAS-3D
The KOMPAS-Graphic drawing editor is capable ofautomating 2D design and engineering plans for various industry verticals. It is used for machine design, civil engineering works, and for generating layoutdrawings and diagrams
KOMPAS-Graphic can automatically generate associative drawings from three-dimensional models, including cuts, sections,local cuts, detail views, views along arrows, and views with breaks. All of theseare associated with the 3D model, so that any changes to the model arer eflected in the 2D drawings.
Standard views are automatically constructed, with links to projections. The properties of 2D drawings such as designation,description, and weight, are synchronized with the 3D model.
KOMPAS-Graphic can be used in two ways
As a drawing and design module fully integrated into KOMPAS-3D
As an independent product fully capable of handlingall 2D designing and documentation requirements
KOMPAS-Graphic’s functions are aimed at quickly creating high-quality drawings and diagrams, performing calculations,generating explanatory notes, specifications, and instructions, and outputting other documents
KOMPAS-Graphic imports and exports drawings in DXF,DWG, and IGES formats
These translation tools allow you to exchange data with clients and customers using any drawing system
Well-designed and convenient interface makes the designer’s work fast and enjoyable
Multi-document mode for working with many drawings at once
Various methods and modes for constructing graphical primitives, including orthogonal drawing and grid snapping
Management of objects in drawings
Power tools for creating parametric models of typical parts and assemblies
Creation of typical fragment libraries, with no need for programming
Fully flexible styles for lines, shading, and text
Numerous methods for placing dimensions and notations
Automatic selection of tolerances and deviation values
Fast access to typical text and designations
Built-in text editor with spell checking
Built-in table editor
The translators include the following
Reads and writes 2D and 3D drawings in DXF, DWG,and IGES® formats - Reads 3D models from DWG, DXF, IGES®, SAT, XT, andSTEP files - Writes 3D models to IGES®, SAT, XT, STEP, VRML andSTL files - Writes BOM data to DBF and Excel files - Exports KOMPAS documents to bitmapped (raster)formats, such as TIFF, GIF, JPEG, BMP, PNG, and TGA. - Reads and writes in ASCII (DOS), ANSI (Windows) textformats; reads RTF text files - Writes 3D models, drawings, and BOMs to eDrawingsfiles
|2D user|| 3D user || Text documentation, BOM|
| DXF - DWG - IGES - TIFF - GIF, |
JPEG - BMP - PNG TGA.
| Catia V5 © - Siemens NX © - Pro/Engineer © Solidworks © - Inventor © - DXF - DWG |
IGES - SAT - Parasolid - STEP
| ASCII (DOS) text file, ANSI (Windows) text file, |
RTF files - TGA. 'margi - TIFF - GIF - JPEG - BMP - PNG
|Export|| DXF - DWG - 2D IGES TIFF - GIF |
JPEG - BMP - PNG - TGA.
|IGES - SAT - Parasolid - STEP - VRML - ST - TIFF - GIF - JPEG - BMP - PNG - TGA||ASCII (DOS) text file - ANSI (Windows) text file |
RTF - DBF - XLS Excel - TIFF - GIF - JPEG - BMP - PNG - TGA.
CONTACT - firstname.lastname@example.org