PAVIATH INTEGRATED SOLUTION
PAVIATH INTEGRATED SOLUTION
Paviath
PISN ENGINEERING PROFESSIONAL ENGINEERING SYLLABUS MECHANICAL ALLIED

ENGINEERING SYLLABUS MECHANICAL ALLIED

FEATURE
MECHANISM
MACHINE ELEMENTS
CAD PROGRAM
MULTIBODY DYNAMICS
MATHEMATICAL TECHNOLOGY
FEATURE

EXPOSURE ON FEATURE AND APPLICATION OF APPLICATION TOOLS »»»»SYLLABUS PROGRAM FOR ALLIED BRANCHES

  • AERONAUTICAL ENGINEERING
  • AUTOMOBILE ENGINEERING

  • MARINE ENGINEERING
  • AGRICULTURE ENGINEERING 

MECHANISM

SAM ♦ MECHANISM DESIGN » KINEMATIC ANALYSIS » KINETO-STATICS ANALYSIS » REVERSE ENGINEERING ♦ MECHANISM INNOVATION DATA ♦ INPUT TO DYNAMIC & STATIC ANALYSIS

MACHINE ELEMENTS
APM MULTIPHYSICS  PHYSICAL PROCESSESAPM FGA ANALYSIS OF LIQUIDS AND GASESAPM FEM  FINITE ELEMENT ANALYSIS APM CAM MECHANISM
APM PLAIN BEARINGS
APM STRUCTURE 3D STRUCTURAL ANALYSISAPM STUDIO FEA PRE/POST PROCESSOR 
APM TRANS DESIGNING TRANSMISSIONS APM SCREW SLIP, BALL & PLANETARY SCREWAPM EMA ANALYSIS ELECTROMAGNETIC APM BEAR DESIGNING ROLLING BEARING APM DRIVE  MOTION ARBITRARY STRUCTURE APM GRAPH GRAPHICS
 PARAMETRIC DRAWING

MACHINE ELEMENTSPDM ANALYTICALSTRUCTURAL FINITE ELEMENT LITERATURE

CAD PROGRAM
KOMPAS-3D
KOMPAS-GRAPHIC
3D-MODEL RECOGNITION SYSTEMSTANDARD PARTS
BOM WIZARD UNWRAP 
STEEL STRUCTURES 3D. APM FEM PIPELINES 3D ANIMATIONE CAD–KOMPAS-3D CONVERTER
RENDERING APPLICATIONTRACEPARTSONLINE
MATERIALS LIBRARY
ANALYSIS OF KINEMATIC & DYNAMICKOMPAS-MACRO
CABLE 3D
MOULD AND DIEDIMENSIONAL CHAINCALCULATOR
MULTIBODY DYNAMICS
UM AUTOMOTIVEUM TRAINUM LOCO UM LOCOMOTIVE UM FREIGHT WAGONCONTACT ADD ONUM TRACKED VEHICLEUM FEM ANALYSIS
UM EXPERIMENTSUM BASEUM SUBSYSTEMSUM DRIVELINEUM MAGLEVUM TOOLSUM CADUM CONTROL  UM MATLAB
UM BALLASTUM 3D CONTACTUM RCFUM WHEEL/RAILUM MONORAILUM LOCO MODEL BRYANSK STATE TECHNICAL UNIVERSITY 
MATHEMATICAL TECHNOLOGY
SALTIRE MATHS ILLUSTRATIONS SALTIRE GEOMETRY EXPRESSIONSSALTIRE MECHANICAL EXPRESSIONSSALTIRE ANALYTIXSALTIRE ANALYTIX CAMSSALTIRE KNOWLEDGE BASE
ENGINEERING PROFESSIONAL NAGANAKULAM KNOWLEDGE CENTRETRAINING FEATURE 

♦ ISO/DIN/GOST/BIS STANDARD

♦ ACADEMIC INPUT → INDUSTRY OUTPUT

♦ TECHNICAL DATA » ENCYCLOPEDIA

♦ ACADEMIC TEXT BOOKS & TEST PAPERS

♦ ↓ GAP   ACADEMIC VS INDUSTRY

♦ CONCEPT » BASICS » DATABASE

♦ PRODUCTS USED INDUSTRIES

♦ REVERSING « PRODUCT « SCRAP 

♦ PRODUCT SPECIFICATION ?
♦ KINEMATIC & KINETOSTATIC FACTORS
♦ ANALYTICAL PARAMETER TO OPTIMIZE
♦ RESEARCH DATA » PUBLICATION

AERONAUTICAL ENGINEERING

I. SOLID MECHANICS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ SOLID MECHANICS

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – III ♦ ENGINEERING CODE CE6452

OBJECTIVES

TO INTRODUCE VARIOUS BEHAVIOR OF STRUCTURAL COMPONENTS UNDER VARIOUS LOADING CONDITIONS

COURSE CONTENTS

  • UNIT I INTRODUCTION.
  • UNIT II STRESSES IN BEAMS.
  • UNIT III DEFLECTION OF BEAMS.
  • UNIT IV TORSION – SPRINGS – COLUMNS.
  • UNIT V BIAXIAL STRESSES

COURSE OUTCOMES

 SOLVE THE PROBLEMS RELATED TO THE STRUCTURAL COMPONENTS UNDER VARIOUS LOADING CONDITIONS.

REFERENCE BOOKS

1. WILLIAM NASH, "STRENGTH OF MATERIALS", TATA MCGRAW HILL, 2004
2. TIMOSHENKO AND YOUNG “STRENGTH OF MATERIALS” VOL. I & II
-------------------
1. DYM,C.L., AND SHAMES,I.H., ‘SOLID MECHANICS’, MCGRAW HILL, KOGAKUSHA, TOKYO, 1973.
2. STEPHEN TIMOSHENKO, ‘STRENGTH OF MATERIALS’, VOL I & II, CBS PUBLISHERS AND DISTRIBUTORS, THIRD EDITION.
3. TIMOSHENKO,S. AND YOUNG, D.H., ‘ELEMENTS OF STRENGTH OF MATERIALS’, T.VAN NOSTRAND CO. INC., PRINCETON, N.J., 1977.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

II. MECHANICS OF MACHINES

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MECHANICS OF MACHINES

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – III ♦ ENGINEERING CODE AT6302 

OBJECTIVES

TO UNDERSTAND THE PRINCIPLES IN THE FORMATION OF MECHANISMS AND THEIR KINEMATICS.
TO UNDERSTAND THE EFFECT OF FRICTION IN DIFFERENT MACHINE ELEMENTS.
TO ANALYSE THE FORCES AND TOQUES ACTING ON SIMPLE MECHANICAL SYSTEMS
TO UNDERSTAND THE IMPORTANCE OF BALANCING AND VIBRATION.

COURSE CONTENTS

  • UNIT I KINEMATIC OF MECHANICS.
  • UNIT II GEARS AND GEAR TRAINS.
  • UNIT III FRICTION.
  • UNIT IV FORCE ANALYSIS.
  • UNIT V BALANCING AND VIBRATION

COURSE OUTCOMES

1. BASICS OF MECHANISMS.

2. KINEMATICS OF LINKAGE MECHANISMS.

3. KINEMATICS OF CAM MECHANISMS.

4. GEARS AND GEAR TRAINS.

5. FRICTION. 

REFERENCE BOOKS

1. AMBEKAR A.G., “MECHANISM AND MACHINE THEORY” PRENTICE HALL OF INDIA, NEW DELHI, 2007
2. SHIGLEY J.E., PENNOCK G.R AND UICKER J.J., “THEORY OF MACHINES AND MECHANISMS”, OXFORD UNIVERSITY PRESS, 2003
---------------------
1. THOMAS BEVAN, “THEORY OF MACHINES”, CBS PUBLISHERS AND DISTRIBUTORS, 1984.
2. GHOSH.A, AND A.K.MALLICK, “THEORY AND MACHINE”, AFFILIATED EAST-WEST PVT. LTD., NEW DELHI, 1988.
3. RAO.J.S. AND DUKKIPATTI R.V. “MECHANISMS AND MACHINES”, WILEY-EASTERN LTD., NEW DELHI, 1992.
4. RAMAMURTHI. V, "MECHANISMS OF MACHINE", NAROSA PUBLISHING HOUSE, 2002.
5. ROBERT L. NORTON, "DESIGN OF MACHINERY", MCGRAW-HILL, 2004.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

III. AIRCRAFT STRUCTURES - I

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AIRCRAFT STRUCTURES - I

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – IV ♦ ENGINEERING CODE AE6403 

OBJECTIVES

  • TO PROVIDE THE STUDENTS AN UNDERSTANDING ON THE LINEAR STATIC ANALYSIS OF DETERMINATE AND INDETERMINATE AIRCRAFT STRUCTURAL COMPONENTS.
  • TO PROVIDE THE DESIGN PROCESS USING DIFFERENT FAILURE THEORIES.

COURSE CONTENTS

  • UNIT I STATICALLY DETERMINATE & INDETERMINATE STRUCTURES.
  • UNIT II ENERGY METHODS.
  • UNIT III COLUMNS.
  • UNIT IV FAILURE THEORIES.
  • UNIT V INDUCED STRESSES

COURSE OUTCOMES

  • ABILITY TO PERFORM LINEAR STATIC ANALYSIS OF DETERMINATE AND INDETERMINATE AIRCRAFT STRUCTURAL COMPONENTS
  • ABILITY TO DESIGN THE COMPONENT USING DIFFERENT THEORIES OF FAILURE

REFERENCE BOOKS

1. TIMOSHENKO AND GERE, "MECHANICS OF MATERIALS", TATA MCGRAW HILL, 1993.
2. MEGSON T M G, "AIRCRAFT STRUCTURES FOR ENGINEERING STUDENTS" ELSEVIER SCIENCE AND TECHNOLOGY, 2007
3. PEERY AND AZAR, "AIRCRAFT STRUCTURES"
--------------
1. DONALDSON, B.K., "ANALYSIS OF AIRCRAFT STRUCTURES - AN INTRODUCTION", MCGRAW HILL, 1993.
2. BRUHN E F, "ANALYSIS AND DESIGN OF FLIGHT VEHICLE STRUCTURES", TRI-STATE OFF-SET COMPANY, USA, 1985
3. PEERY, D.J. AND AZAR,J.J., "AIRCRAFT STRUCTURES", 2ND EDITION, MCGRAW – HILL, N.Y, 1999.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

IV. CAD AND AIRCRAFT COMPONENT DRAWING

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ CAD AND AIRCRAFT COMPONENT DRAWING

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – I♦ ENGINEERING CODE AE6413

OBJECTIVES

  • TO INTRODUCE THE CONCEPT OF DESIGN OF BASIC STRUCTURAL COMPONENTS AND TO DRAFT BOTH MANUALLY AND USING MODELLING PACKAGE.

COURSE CONTENTS

1. DESIGN AND DRAFTING OF RIVETED JOINTS
2. DESIGN AND DRAFTING OF WELDED JOINTS.
3. DESIGN AND DRAFTING CONTROL COMPONENTS CAM
4. DESIGN AND DRAFTING CONTROL COMPONENTS BELL CRANK
5. DESIGN AND DRAFTING CONTROL COMPONENTS GEAR
6. DESIGN AND DRAFTING CONTROL COMPONENTS PUSH-PULL ROD
7. THREE VIEW DIAGRAM OF A TYPICAL AIRCRAFT
8. LAYOUT OF TYPICAL WING STRUCTURE.
9. LAYOUT OF TYPICAL FUSELAGE STRUCTURE.
10. LAYOUT OF CONTROL SYSTEM

COURSE OUTCOMES

  • ABILITY TO DESIGN AND DRAW DIFFERENT JOINTS AND COMPONENTS USING MANUAL DRAFTING METHOD.

REFERENCE BOOKS

SOFT TOOL MANUAL
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

V. AIRCRAFT STRUCTURES -II

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AIRCRAFT STRUCTURES -II

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – ♦ ENGINEERING CODE AE6502 

OBJECTIVES

  1. TO PROVIDE THE STUDENTS VARIOUS METHODS FOR ANALYSIS OF AIRCRAFT WINGS AND FUSELAGE.
  2. TO PROVIDE THE THE BEHAVIOR OF MAJOR AIRCRAFT STRUCTURAL COMPONENTS.

COURSE CONTENTS

  • UNIT I UNSYMMETRICAL BENDING.
  • UNIT II SHEAR FLOW IN OPEN SECTIONS.
  • UNIT III SHEAR FLOW IN CLOSED SECTIONS.
  • UNIT IV BUCKLING OF PLATES.
  • UNIT V STRESS ANALYSIS OF WING AND FUSELAGE

COURSE OUTCOMES

  • ABILITY TO ANALYSE THE AIRCRAFT WINGS AND FUSELAGE
  • ABILITY TO DEMONSTRATE THE BEHAVIOR OF MAJOR AIRCRAFT STRUCTURAL COMPONENTS.

REFERENCE BOOKS

1. MEGSON T M G , "AIRCRAFT STRUCTURES FOR ENGINEERING STUDENTS", ELSEVIER LTD, 2007
2. PEERY, D.J., AND AZAR, J.J., "AIRCRAFT STRUCTURES", 2ND EDITION, MCGRAW – HILL, N.Y., 1999
3. BRUHN. E.H., "ANALYSIS AND DESIGN OF FLIGHT VEHICLES STRUCTURES", TRI-STATE OFF-SET COMPANY, USA, 1985.
--------------------
1. RIVELLO, R.M., "THEORY AND ANALYSIS OF FLIGHT STRUCTURES", MCGRAW HILL, 1993.
2. HOWARD D CURTIS, "FUNDAMENTALS OF AIRCRAFT STRUCTURAL ANALYSIS", WCB-MCGRAW HILL, 1997
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

VI. FINITE ELEMENT METHODS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ FINITE ELEMENT METHODS

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – VI ♦ ENGINEERING CODE AE6601 

OBJECTIVES

  • TO GIVE EXPOSURE VARIOUS METHODS OF SOLUTION AND IN PARTICULAR THE FINITE ELEMENT METHOD. GIVES
EXPOSURE TO THE FORMULATION AND THE PROCEDURE OF THE FINITE ELEMENT METHOD AND ITS APPLICATION TO
VARIETIES OF PROBLEMS.

COURSE CONTENTS


COURSE OUTCOMES

  • UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO UNDERSTAND DIFFERENT MATHEMATICAL
TECHNIQUES USED IN FEM ANALYSIS AND USE OF THEM IN STRUCTURAL AND THERMAL PROBLEM

REFERENCE BOOKS

1. TIRUPATHI.R. CHANDRAPATHA AND ASHOK D. BELEGUNDU, "INTRODUCTION TO FINITE ELEMENTS IN ENGINEERING", PRINTICE HALL INDIA, THIRD EDITION, 2003.
2. RAO. S.S., "FINITE ELEMENT METHODS IN ENGINEERING," BUTTERWORTH AND HEINEMANN, 2001
3. REDDY J.N., "AN INTRODUCTION TO FINITE ELEMENT METHOD", MCGRAW HILL, 2000.
-------------------------
1. KRISHNAMURTHY, C.S., "FINITE ELEMENT ANALYSIS", TATA MCGRAW HILL, 2000.
2. BATHE, K.J. AND WILSON, E.L., "NUMERICAL METHODS IN FINITE ELEMENTS ANALYSIS", PRENTICE HALL OF INDIA, 1985.
3. ROBERT D COOK, DAVID S MALKUS, MICHAEL E PLESHA, "CONCEPTS AND APPLICATIONS OF FINITE ELEMENT ANALYSIS", 4TH EDITION, JOHN WILEY AND SONS, INC., 2003.
4. LARRY J SEGERLIND, "APPLIED FINITE ELEMENT ANALYSIS", SECOND EDITION, JOHN WILEY AND SONS, INC. 1984.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

VII. VIBRATIONS AND ELEMENTS OF AEROELASTICITY

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ VIBRATIONS AND ELEMENTS OF AEROELASTICITY

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER – VI ♦ ENGINEERING CODE AE6602

OBJECTIVES

  • TO STUDY THE EFFECT OF TIME DEPENDENT FORCES ON MECHANICAL SYSTEMS AND TO GET THE NATURAL CHARACTERISTICS OF SYSTEM WITH MORE DEGREE OF FREEDOM SYSTEMS.
  • TO STUDY THE AEROELASTIC EFFECTS OF AIRCRAFT WING.

COURSE CONTENTS

  • UNIT I SINGLE DEGREE OF FREEDOM SYSTEMS.
  • UNIT II MULTI DEGREES OF FREEDOM SYSTEMS.
  • UNIT III CONTINUOUS SYSTEMS.
  • UNIT IV APPROXIMATE METHODS.
  • UNIT V ELEMENTS OF AEROELASTICITY

COURSE OUTCOMES

  1. GAINING UNDERSTANDING OF SINGLE AND MULTI DEGREE VIBRATING SYSTEMS
  2. ABILITY TO USE NUMERICAL TECHNIQUES FOR VIBRATION PROBLEMS
  3. KNOWLEDGE ACQUIRED IN AERO ELASTICITY AND FLUTTERING

REFERENCE BOOKS

1. LEONARD MEIROVITCH, "ELEMENTS OF VIBRATION ANALYSIS". MCGRAW HILL INTERNATIONAL EDITION,2007
2. GROVER. G.K., “MECHANICAL VIBRATIONS”, 7TH EDITION, NEM CHAND BROTHERS, ROORKEE, INDIA, 2003
3. THOMSON W T, ‘THEORY OF VIBRATION WITH APPLICATION’ - CBS PUBLISHERS, 1990.
-------------------------
1. WILLIAM WEAVER, STEPHEN P. TIMOSHENKO, DONOVAN H. YOUND, DONOVAN H. YOUNG. ‘VIBRATION PROBLEMS IN ENGINEERING’ – JOHN WILEY AND SONS, NEW YORK, 2001
2. BISPLINGHOFF R.L., ASHELY H AND HOGMAN R.L., "AEROELASTICITY", ADDISION WESLEY PUBLICATION, NEW TORK, 1983.
3. WILLIAM W SETO, "MECHANICAL VIBRATIONS" – MCGRAW HILL, SCHAUM SERIES.
4. TSE. F.S., MORSE, I.F., HINKLE, R.T., "MECHANICAL VIBRATIONS" – PRENTICE HALL, NEW YORK, 1984.
5. DEN HARTOG, "MECHANICAL VIBRATIONS" CRASTRE PRESS, 2008.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

VIII. COMPOSITE MATERIALS AND STRUCTURES

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ COMPOSITE MATERIALS AND STRUCTURES

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER VII ELECTIVES– II ♦ ENGINEERING CODE AE6603

OBJECTIVES

TO MAKE THE STUDENT UNDERSTAND THE ANALYSIS OF COMPOSITE LAMINATES UNDER DIFFERENT LOADING
CONDITIONS AND DIFFERENT ENVIRONMENTAL CONDITIONS.

COURSE CONTENTS

  • UNIT I MICROMECHANICS.
  • UNIT II MACROMECHANICS.
  • UNIT III LAMINATED PLATE THEORY.
  • UNIT IV FABRICATION PROCESS AND REPAIR METHODS.
  • UNIT V SANDWICH CONSTRUCTIONS

COURSE OUTCOMES

  • UNDERSTANDING THE MECHANICS OF COMPOSITE MATERIALS
  • ABILITY TO ANALYSE THE LAMINATED COMPOSITES FOR VARIOUS LOADING EASES
  • KNOWLEDGE GAINED IN MANUFACTURE OF COMPOSITES

REFERENCE BOOKS

1. DAM ISHAI., "MECHANICS OF COMPOSITE MATERIALS,"
2. AUTAR K KAW, ‘MECHANICS OF COMPOSITE MATERIALS’, CRC PRESS, 1997.
3. MADHUJI MUKHAPADHYAY, MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES, UNIVERSITY PRESS, 2004
-------------------
1. AGARWAL, B.D., AND BROUTMAN, L.J., "ANALYSIS AND PERFORMANCE OF FIBRE COMPOSITES," JOHN WILEY AND SONS. INC., NEW YORK, 1995.
2. LUBIN, G., "HANDBOOK ON ADVANCED PLASTICS AND FIBRE GLASS", VON NOSTRAND REINHOLD CO., NEW YORK, 1989.
3. CALCOTE, L R. “THE ANALYSIS OF LAMINATED COMPOSITE STRUCTURES”, VON – NOSTRAND REINHOLD COMPANY, NEW YORK 1998.
4. ALLEN BAKER, "COMPOSITE MATERIALS FOR AIRCRAFT STRUCTURES", AIAA SERIES, II EDITION, 1999.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

IX. THEORY OF ELASTICITY

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ THEORY OF ELASTICITY

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER VII ELECTIVES– II ♦ ENGINEERING CODE AE6001

OBJECTIVES

♦ TO MAKE THE STUDENT UNDERSTAND THE ELASTIC BEHAVIOR OF DIFFERENT STRUCTURAL COMPONENTS UNDER
VARIOUS LOADINGS AND BOUNDARY CONDITIONS.

COURSE CONTENTS

  • UNIT I BASIC EQUATIONS OF ELASTICITY.
  • UNIT II PLANE STRESS AND PLANE STRAIN PROBLEMS.
  • UNIT III POLAR COORDINATES.
  • UNIT IV TORSION.
  • UNIT V INTRODUCTION TO THEORY OF PLATES AND SHELLS.

COURSE OUTCOMES

ABILITY TO USE MATHEMATICAL KNOWLEDGE TO SOLVE PROBLEM RELATED TO STRUCTURAL ELASTICITY.

REFERENCE BOOKS

1. TIMOSHENKO, S., AND GOODIER, T.N., "THEORY OF ELASTICITY", MCGRAW – HILL LTD., TOKYO, 1990.
2. ANSEL C UGURAL AND SAUL K FENSTER, "ADVANCED STRENGTH AND APPLIED ELASTICITY", 4TH EDITION, PRENTICE HALL, NEW JERSEY, 2003.
3. BHASKAR, K., AND VARADAN, T. K., "THEORY OF ISOTROPIC/ORTHOTROPIC ELASTICITY", CRC PRESS USA, 2009.
------------------------
1. WANG, C. T., "APPLIED ELASTICITY", MCGRAW – HILL CO., NEW YORK, 1993.
2. SOKOLNIKOFF, I. S., "MATHEMATICAL THEORY OF ELASTICITY", MCGRAW – HILL, NEW YORK, 1978.
3. VOLTERRA & J.H. CAINES, "ADVANCED STRENGTH OF MATERIALS", PRENTICE HALL, NEW JERSEY, 1991
4. BARBER, J. R., "ELASTICITY", KLUWER ACADEMIC PUBLISHERS, 2004
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

X. THEORY OF PLATES AND SHELLS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ THEORY OF PLATES AND SHELLS

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER VII ELECTIVES– II ♦ ENGINEERING CODE AE6006

OBJECTIVES

TO STUDY THE BEHAVIOUR OF THE PLATES AND SHELLS WITH DIFFERENT GEOMETRY UNDER VARIOUS TYPES OF LOADS.

COURSE CONTENTS

UNIT I CLASSICAL PLATE THEORY.
UNIT II PLATES OF VARIOUS SHADES.
UNIT III EIGENVALUE ANALYSIS.
UNIT IV APPROXIMATE METHODS.
UNIT V SHELLS

COURSE OUTCOMES

ABILITY TO USE DIFFERENT THEORIES TO PLATE AND SHELL
PERFORM STABILITY AND FREE VIBRATION CALCULATIONS
USE OF DIFFERENT METHODS FOR STABILITY ANALYSIS

REFERENCE BOOKS

1. TIMOSHENKO, S.P. WINOWSKY. S., AND KREGER, “THEORY OF PLATES AND SHELLS”, MCGRAW-HILL BOOK CO. 1990. 80
2. VARADAN. T. K. AND BHASKAR. K., “THEORY OF PLATES AND SHELLS”, 1999, NAROSA.
--------------------------
1. FLUGGE, W. “STRESSES IN SHELLS”, SPRINGER – VERLAG, 1985.
2. TIMOSHENKO, S.P. AND GERE, J.M., “THEORY OF ELASTIC STABILITY”, MCGRAW-HILL BOOK CO. 1986
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

XI. FATIGUE AND FRACTURE

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ FATIGUE AND FRACTURE

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER VII ELECTIVES– II ♦ ENGINEERING CODE AE6007

OBJECTIVES

TO UNDERSTAND THE BASIC CONCEPTS INVOLVED IN FATIGUE ANALYSIS AND TO STUDY THE IMPORTANCE OF
FRACTURE MECHANICS IN AEROSPACE APPLICATIONS.

COURSE CONTENTS

UNIT I FATIGUE OF STRUCTURES.
UNIT II STATISTICAL ASPECTS OF FATIGUE BEHAVIOUR.
UNIT III PHYSICAL ASPECTS OF FATIGUE.
UNIT IV FRACTURE MECHANICS.
UNIT V FATIGUE DESIGN AND TESTING

COURSE OUTCOMES

ABILITY TO APPLY MATHEMATICAL KNOWLEDGE TO DEFINE FATIGUE BEHAVIORS
ABILITY TO PERFORM FATIGUE DESIGN
ABILITY TO ANALYSE THE FRACTURE DUE TO FATIGUE

REFERENCE BOOKS

1. PRASANTH KUMAR, "ELEMENTS OF FRACTURE MECHANICS", WHEETER PUBLICATION, 1999.
2. BARROIS W, RIPELY, E.L., “FATIGUE OF AIRCRAFT STRUCTURE," PERGAMON PRESS. OXFORD, 1983.
----------------------
1. SIH C.G., “MECHANICS OF FRACTURE.” VOL - I, SIJTHOFF AND W NOORDHOFF INTERNATIONAL PUBLISHING CO., NETHERLANDS, 1989.
2. KNOTT, J.F., “FUNDAMENTALS OF FRACTURE MECHANICS,” - BUTERWORTH & CO., LTD., LONDON, 1983.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AERONAUTICAL ENGINEERING

XII. STRUCTURAL DYNAMICS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ STRUCTURAL DYNAMICS

♦ AERONAUTICAL ENGINEERING ♦ SEMESTER VIII ELECTIVES – IV ♦ ENGINEERING CODE AE6016 

OBJECTIVES

TO STUDY THE EFFECT OF PERIODIC AND A PERIODIC FORCES ON MECHANICAL SYSTEMS WITH MATRIX APPROACH
AND ALSO TO GET THE NATURAL CHARACTERISTICS OF LARGE SIZED PROBLEMS USING APPROXIMATE METHODS.

COURSE CONTENTS

UNIT I FORCE DEFLECTION PROPERTIES OF STRUCTURES.
UNIT II PRINCIPLES OF DYNAMICS.
UNIT III NATURAL MODES OF VIBRATION.
UNIT IV ENERGY METHODS.
UNIT V APPROXIMATE METHODS

COURSE OUTCOMES

KNOWING VARIOUS OPTIONS OF MATHEMATICAL MODELING OF STRUCTURES
METHOD OF EVALUATING THE RESPONSE OF STRUCTURES UNDER VARIOUS DYNAMICALLY LOADED CONDITIONS
KNOWLEDGE IN NATURAL MODES OF VIBRATION OF STRUCTURES
GAINING KNOWLEDGE IN NUMERICAL AND APPROXITE METHODS OF EVALUATING NATURAL MODES OF VIBRATION.

REFERENCE BOOKS

1. TSE. F.S., MORSE. I.E. AND HINKLE. H.T., “MECHANICAL VIBRATIONS: THEORY AND APPLICATIONS” PRENTICE HALL OF INDIA PVT. LTD, NEW DELHI, 2004.
2. HURTY. W.C. AND M.F. RUBINSTEIN, “DYNAMICS OF STRUCTURES”, PRENTICE HALL OF INDIA PVT. LTD., NEW DELHI 1987. 93
--------------------
1. VIERCK. R.K., “VIBRATION ANALYSIS”, 2ND EDITION, THOMAS Y. CROWELL & CO HARPER & ROW PUBLISHERS, NEW YORK, U.S.A. 1989.
2. TIMOSHENKO. S.P., AND D.H. YOUNG, “VIBRATION PROBLEMS IN ENGINEERING”, JOHN WILLEY & SONS INC., 1984.
3. RAMAMURTHI. V., “MECHANICAL VIBRATION PRACTICE AND NOISE CONTROL” NAROSA PUBLISHING HOUSE PVT. LTD, 2008
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

I. MECHANICS OF MACHINES

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MECHANICS OF MACHINES

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER III ♦ ENGINEERING CODE AT6302 

OBJECTIVES

TO UNDERSTAND THE PRINCIPLES IN THE FORMATION OF MECHANISMS AND THEIR KINEMATICS.
TO UNDERSTAND THE EFFECT OF FRICTION IN DIFFERENT MACHINE ELEMENTS.
TO ANALYSE THE FORCES AND TOQUES ACTING ON SIMPLE MECHANICAL SYSTEMS
TO UNDERSTAND THE IMPORTANCE OF BALANCING AND VIBRATION.

COURSE CONTENTS

UNIT I KINEMATIC OF MECHANICS.
UNIT II GEARS AND GEAR TRAINS.
UNIT III FRICTION. UNIT IV FORCE ANALYSIS.
UNIT V BALANCING AND VIBRATION

COURSE OUTCOMES

1. BASICS OF MECHANISMS.

2. KINEMATICS OF LINKAGE MECHANISMS.

3. KINEMATICS OF CAM MECHANISMS.

4. GEARS AND GEAR TRAINS.

5. FRICTION. 

REFERENCE BOOKS

1. AMBEKAR A.G., “MECHANISM AND MACHINE THEORY” PRENTICE HALL OF INDIA, NEW DELHI, 2007
2. SHIGLEY J.E., PENNOCK G.R AND UICKER J.J., “THEORY OF MACHINES AND MECHANISMS”, OXFORD UNIVERSITY PRESS, 2003
---------------
1. THOMAS BEVAN, “THEORY OF MACHINES”, CBS PUBLISHERS AND DISTRIBUTORS, 1984.
2. GHOSH.A, AND A.K.MALLICK, “THEORY AND MACHINE”, AFFILIATED EAST-WEST PVT. LTD., NEW DELHI, 1988.
3. RAO.J.S. AND DUKKIPATTI R.V. “MECHANISMS AND MACHINES”, WILEY-EASTERN LTD., NEW DELHI, 1992.
4. RAMAMURTHI. V., "MECHANISMS OF MACHINE", NAROSA PUBLISHING HOUSE, 2002.
5. ROBERT L.NORTON, "DESIGN OF MACHINERY", MCGRAW-HILL, 2004.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

II. STRENGTH OF MATERIALS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ STRENGTH OF MATERIALS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER IV ♦ ENGINEERING CODE CE6306

OBJECTIVES

TO UNDERSTAND THE STRESSES DEVELOPED IN BARS, COMPOUNDS BARS, BEAMS, SHAFTS, CYLINDERS AND SPHERES.

COURSE CONTENTS

UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS.
UNIT II TRANSVERSE LOADING ON BEAMS AND STRESSES IN BEAM.
UNIT III TORSION.
UNIT IV DEFLECTION OF BEAMS.
UNIT V THIN CYLINDERS, SPHERES AND THICK CYLINDERS

COURSE OUTCOMES

 UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO APPLY MATHEMATICAL KNOWLEDGE TO CALCULATE THE DEFORMATION BEHAVIOR OF SIMPLE STRUCTURES.
 CRITICALLY ANALYSE PROBLEM AND SOLVE THE PROBLEMS RELATED TO MECHANICAL ELEMENTS AND ANALYSE THE DEFORMATION BEHAVIOR FOR DIFFERENT TYPES OF LOADS.

REFERENCE BOOKS

1. BANSAL, R.K., "STRENGTH OF MATERIALS", LAXMI PUBLICATIONS (P) LTD., 2007
2. JINDAL U.C., "STRENGTH OF MATERIALS", ASIAN BOOKS PVT. LTD., NEW DELHI, 2007
----------------------
1. EGOR. P.POPOV “ENGINEERING MECHANICS OF SOLIDS” PRENTICE HALL OF INDIA, NEW DELHI, 2001
2. SUBRAMANIAN R., "STRENGTH OF MATERIALS", OXFORD UNIVERSITY PRESS, OXFORD HIGHER EDUCATION SERIES, 2007.
3. HIBBELER, R.C., "MECHANICS OF MATERIALS", PEARSON EDUCATION, LOW PRICE EDITION, 2007
4. FERDINAND P. BEEN, RUSSELL JOHNSON, J.R. AND JOHN J. DEWOLE "MECHANICS OF MATERIALS", TATA
MCGRAW HILL PUBLISHING ‘CO. LTD., NEW DELHI, 2005.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

III. AUTOMOTIVE CHASSIS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AUTOMOTIVE CHASSIS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER IV ♦ ENGINEERING CODE AT6402

OBJECTIVES

STUDY OF THE CONSTRUCTIONAL DETAILS AND THEORY OF IMPORTANT DRIVE LINE, STRUCTURAL, STEERING,
BRAKING AND SUSPENSION SYSTEMS OF AUTOMOBILES. PROBLEM–SOLVING IN STEERING MECHANISM,
PROPELLER SHAFT, BRAKING AND SUSPENSION SYSTEMS ARE TO BE DONE.

COURSE CONTENTS

UNIT I LAYOUT, FRAME, FRONT AXLE AND STEERING SYSTEM.
UNIT II DRIVE LINE, FINAL DRIVE AND DIFFERENTIAL.
UNIT III REAR AXLES, WHEELS, RIMS AND TYRES.
UNIT IV SUSPENSION SYSTEM.
UNIT V BRAKE SYSTEMS.

COURSE OUTCOMES

 THE STUDENTS WILL UNDERSTAND THE CONSTRUCTIONAL, WORKING PRINCIPLE OF VARIOUS SUB SYSTEM OF AN
AUTOMOBILE.

REFERENCE BOOKS

1. NEWTON STEEDS AND GARRET, “MOTOR VEHICLES” 13TH EDITION, BUTTERWORTH, LONDON, 2005.
2. HEINZ HAZLER, “MODERN VEHICLE TECHNOLOGY”, BUTTERWORTH, LONDON, 2005.
3. DEVARADJANE. DR. G., DR. M. KUMARESAN, "AUTOMOBILE ENGINEERING", AMK PUBLISHERS, 2013.
-----------------------
1. HELDT P.M., “AUTOMOTIVE CHASSIS” CHILTON CO., NEW YORK, 1990
2. GIRI. N.K., “AUTOMOTIVE MECHANICS” KHANNA PUBLISHERS, NEW DELHI, 2005.
3. MILLIKEN & MILLIKEN, “RACE CAR VEHICLE DYNAMICS”, SAE, 1995
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

IV. DESIGN OF MACHINE ELEMENTS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ DESIGN OF MACHINE ELEMENTS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE ME6503

OBJECTIVES

TO FAMILIARIZE THE VARIOUS STEPS INVOLVED IN THE DESIGN PROCESS
TO UNDERSTAND THE PRINCIPLES INVOLVED IN EVALUATING THE SHAPE AND DIMENSIONS OF A COMPONENT TO SATISFY FUNCTIONAL AND STRENGTH REQUIREMENTS.
TO LEARN TO USE STANDARD PRACTICES AND STANDARD DATA
TO LEARN TO USE CATALOGUES AND STANDARD MACHINE COMPONENTS

COURSE CONTENTS

UNIT I STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS.
UNIT II SHAFTS AND COUPLINGS.
UNIT III TEMPORARY AND PERMANENT JOINTS.
UNIT IV ENERGY STORING ELEMENTS AND ENGINE COMPONENTS.
UNIT V BEARINGS.

COURSE OUTCOMES

UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO APPLY THE SUCCESSFULLY DESIGN VARIOUS
MECHANICAL COMPONENTS

REFERENCE BOOKS

1. BHANDARI V, “DESIGN OF MACHINE ELEMENTS”, 3RD EDITION, TATA MCGRAW-HILL BOOK CO, 2010.
2. JOSEPH SHIGLEY, CHARLES MISCHKE,RICHARD BUDYNAS AND KEITH NISBETT “MECHANICAL ENGINEERING DESIGN”, 8TH EDITION, TATA MCGRAW-HILL , 2008.
----------------------
1. SUNDARARAJAMOORTHY T. V. SHANMUGAM .N, “MACHINE DESIGN”, ANURADHA PUBLICATIONS, CHENNAI, 2003.
2. ROBERT C. JUVINALL AND KURT M. MARSHEK, “FUNDAMENTALS OF MACHINE DESIGN” ,4TH EDITION, WILEY, 2005
3. ALFRED HALL, HALOWENKO, A AND LAUGHLIN, H., “MACHINE DESIGN”, TATA MCGRAW-HILL BOOK CO. (SCHAUM’S OUTLINE), 2010
4. BERNARD HAMROCK,STEVEN SCHMID,BO JACOBSON, “FUNDAMENTALS OF MACHINE ELEMENTS”, 2ND EDITION, TATA MCGRAW-HILL BOOK CO., 2006.
5. ORTHWEIN W, “MACHINE COMPONENT DESIGN”, JAICO PUBLISHING CO, 2003.
6. ANSEL UGURAL, “MECHANICAL DESIGN – AN INTEGRAL APPROACH, 1ST EDITION, TATA MCGRAW-HILL BOOK CO, 2003.
7. MERHYLE F. SPOTTS, TERRY E. SHOUP AND LEE E. HORNBERGER, “DESIGN OF MACHINE ELEMENTS” 8TH EDITION, PRINTICE HALL, 2003.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

V. AUTOMOTIVE TRANSMISSION

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AUTOMOTIVE TRANSMISSION

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE AT6501

OBJECTIVES

TO KNOW ABOUT THE VARIOUS TRANSMISSION AND DRINE LINE UNITS OF AUTOMOBILES.

COURSE CONTENTS

UNIT I CLUTCH AND GEAR BOX.
UNIT II HYDRODYNAMIC TRANSMISSION.
UNIT III EPICYCLIC GEARBOXES USED IN AUTOMATIC TRANSMISSION.
UNIT IV AUTOMATIC TRANSMISSION APPLICATIONS.
UNIT V HYDROSTATIC AND ELECTRIC DRIVE

COURSE OUTCOMES

THE STUDENTS WILL UNDERSTAND THE CONSTRUCTIONAL, WORKING PRINCIPLE OF VARIOUS TYPES OF MANUAL
AND AUTOMOTIVE TRANSMISSION OF AN AUTOMOBILE.

REFERENCE BOOKS

1. HELDT, P.M., "TORQUE CONVERTERS", CHILTON BOOK CO., 1962.
2. NEWTON AND STEEDS, "MOTOR VEHICLES", ILLIFFE PUBLISHERS, 1985.
3. DEVARADJANE. DR. G., KUMARESAN. DR. M., "AUTOMOBILE ENGINEERING", AMK PUBLISHERS, 2013.
-----------------------
1. SAE TRANSACTIONS 900550 & 930910.
2. HYDROSTATIC TRANSMISSIONS FOR VEHICLE APPLICATIONS, I MECH E CONFERENCE, 1981-88.
3. CROUSE,W.H., ANGLIN,D.L.," AUTOMOTIVE TRANSMISSION AND POWER TRAINS CONSTRUCTION", MCGRAW HILL, 1976.
4. HEINZ HEISLER, "ADVANCE VEHICLE TECHNOLOGY", BUTTERWORTH-HEINEMANN, 2002
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

VI. AUTOMOTIVE ENGINE COMPONENTS DESIGN

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AUTOMOTIVE ENGINE COMPONENTS DESIGN

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VI ♦ ENGINEERING CODE AT6601

OBJECTIVES

TO MAKE THE STUDENTS UNDERSTAND THE DESIGN CONCEPT AND PRINCIPLES OF VARIOUS ENGINE COMPONENTS. THESE CONCEPTS AND PRINCIPLES ARE FAMILIARIZED FOR DESIGN OF COMPONENTS.

COURSE CONTENTS

UNIT I INTRODUCTION.
UNIT II DESIGN OF CYLINDER, PISTON AND CONNECTING ROD.
UNIT III DESIGN OF CRANKSHAFT.
UNIT IV DESIGN OF FLYWHEELS.
UNIT V DESIGN OF VALVES AND VALVE TRAIN.

COURSE OUTCOMES

UPON COMPLETION OF THE COURSE, STUDENTS WILL BE ABLE TO IMPART KNOWLEDGE IN AUTOMOTIVE ENGINE. THE DETAILED CONCEPT, CONSTRUCTION AND PRINCIPLE OF OPERATION OF ENGINE AND VARIOUS ENGINE COMPONENTS, COMBUSTION, COOLING AND LUBRICATION SYSTEMS WILL BE TAUGHT TO THE STUDENTS. AT THE END OF THE COURSE THE STUDENTS WILL HAVE COMMAND OVER AUTOMOTIVE ENGINES AND THE RECENT DEVELOPMENT IN THE AREA OF ENGINES.

REFERENCE BOOKS

1. KHURMI. R.S. & GUPTA. J.K., "A TEXT BOOK OF MACHINE DESIGN", EURASIA PUBLISHING HOUSE (PVT)
LTD, 2001.
--------------------
1. JAIN.R.K, “MACHINE DESIGN”, KHANNA PUBLISHERS, NEW DELHI, 2005.
2. GIRI.N.K, "AUTOMOBILE MECHANICS", KHANNA PUBLISHERS, NEW DELHI, 2007.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

VII. AUTOMOTIVE CHASSIS COMPONENTS DESIGN

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ AUTOMOTIVE CHASSIS COMPONENTS DESIGN

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VI ♦ ENGINEERING CODE AT6602

OBJECTIVES

THE STUDENT WILL BE ABLE TO UNDERSTAND THE FUNDAMENTAL PRINCIPLES INVOLVED IN DESIGN OF
COMPONENTS OF AUTOMOTIVE CHASSIS, THE COMPLETE DESIGN EXERCISE AND ARRIVE AT IMPORTANT
DIMENSIONS OF CHASSIS COMPONENTS.

COURSE CONTENTS

UNIT I VEHICLE FRAME AND SUSPENSION.
UNIT II FRONT AXLE AND STEERING SYSTEMS.
UNIT III CLUTCH.
UNIT IV GEAR BOX.
UNIT V DRIVE LINE AND REAR AXLE

COURSE OUTCOMES

AT THE END OF THE COURSE, THE STUDENT CAN ABLE TO DESIGN THE AUTOMOTIVE COMPONENTS LIKE FRAME, SUSPENSION SYSTEMS, AXLES, CLUTCH, GEAR BOX, DRIVE LINE COMPONENTS ETC

REFERENCE BOOKS

1. GIRI, N.K., "AUTOMOBILE MECHANICS", KHANNA PUBLISHERS, NEW DELHI, 2007.
2. KHURMI. R.S. & GUPTA. J.K., "A TEXTBOOK OF MACHINE DESIGN", EURASIA PUBLISHING HOUSE (PVT) LTD, 2001.
---------------------
1. HELDT, P.M., "AUTOMOTIVE CHASSIS", CHILTON BOOK CO., 1992.
2. DEAN AVERNS, "AUTOMOBILE CHASSIS DESIGN", ILLIFE BOOK CO., 2001.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

VIII. VEHICLE DYNAMICS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ VEHICLE DYNAMICS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VI ♦ ENGINEERING CODE AT6604

OBJECTIVES

TO KNOW ABOUT THE APPLICATION OF BASIC MECHANICS PRINCIPLES FOR DYNAMIC ANALYSIS OF VEHICLES.

COURSE CONTENTS

UNIT I CONCEPT OF VIBRATION.
UNIT II TIRES.
UNIT III VERTICAL DYNAMICS.
UNIT IV LONGITUDINAL DYNAMICS AND CONTROL.
UNIT V LATERAL DYNAMICS.

COURSE OUTCOMES

THE STUDENT WILL UNDERSTAND HOW PASSENGER COMFORT IS ACHIEVED ALONG WITH VEHICLE STABILITY.

REFERENCE BOOKS

1. SINGIRESU S. RAO, "MECHANICAL VIBRATIONS", 5TH EDITION, PRENTICE HALL, 2010
2. WONG. J. Y., "THEORY OF GROUND VEHICLES", 3RD EDITION, WILEY-INTERSCIENCE, 2001
3. RAJESH RAJAMANI, "VEHICLE DYNAMICS AND CONTROL", 1ST EDITION, SPRINGER, 2005
4. THOMAS D. GILLESPIE, "FUNDAMENTALS OF VEHICLE DYNAMICS", SOCIETY OF AUTOMOTIVE ENGINEERS INC, 1992
-----------------------------
1. DEAN KARNOPP, "VEHICLE STABILITY", 1ST EDITION, MARCEL DEKKER, 2004
2. NAKHAIE JAZAR. G., "VEHICLE DYNAMICS: THEORY AND APPLICATION", 1ST EDITION, SPRINGER, 2008
3. MICHAEL BLUNDELL & DAMIAN HARTY, "THE MULTIBODY SYSTEMS APPROACH TO VEHICLE DYNAMICS", ELSEVIER LIMITED, 2004
4. HANS B PACEJKA, "TIRE AND VEHICLE DYNAMICS", 2ND EDITION, SAE INTERNATIONAL, 2005
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

IX. FINITE ELEMENT ANALYSIS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ FINITE ELEMENT ANALYSIS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VII ♦ ENGINEERING CODE ME6603

OBJECTIVES

TO INTRODUCE THE CONCEPTS OF MATHEMATICAL MODELING OF ENGINEERING PROBLEMS.
TO APPRECIATE THE USE OF FEM TO A RANGE OF ENGINEERING PROBLEMS.

COURSE CONTENTS

UNIT I INTRODUCTION.
UNIT II ONE-DIMENSIONAL PROBLEMS.
UNIT III TWO DIMENSIONAL SCALAR VARIABLE PROBLEMS.
UNIT IV TWO DIMENSIONAL VECTOR VARIABLE PROBLEMS.
UNIT V ISOPARAMETRIC FORMULATION

COURSE OUTCOMES

UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO UNDERSTAND DIFFERENT MATHEMATICAL TECHNIQUES USED IN FEM ANALYSIS AND USE OF THEM IN STRUCTURAL AND THERMAL PROBLEM

REFERENCE BOOKS

1. REDDY. J.N., “AN INTRODUCTION TO THE FINITE ELEMENT METHOD”, 3RD EDITION, TATA MCGRAW-HILL, 2005
2. SESHU, P, “TEXT BOOK OF FINITE ELEMENT ANALYSIS”, PRENTICE-HALL OF INDIA PVT. LTD., NEW DELHI, 2007.
----------------------
1. RAO, S.S., “THE FINITE ELEMENT METHOD IN ENGINEERING”, 3RD EDITION, BUTTERWORTH HEINEMANN, 2004.
2. LOGAN, D.L., “A FIRST COURSE IN FINITE ELEMENT METHOD”, THOMSON ASIA PVT. LTD., 2002.
3. ROBERT D. COOK, DAVID S. MALKUS, MICHAEL E. PLESHA, ROBERT J. WITT, “CONCEPTS AND APPLICATIONS OF FINITE ELEMENT ANALYSIS”, 4TH EDITION, WILEY STUDENT EDITION, 2002.
4. CHANDRUPATLA & BELAGUNDU, “INTRODUCTION TO FINITE ELEMENTS IN ENGINEERING”, 3RD EDITION, PRENTICE HALL COLLEGE DIV, 1990.
5. BHATTI ASGHAR M, "FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS", JOHN WILEY & SONS, 2013
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

X. VEHICLE BODY ENGINEERING

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ VEHICLE BODY ENGINEERING

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VIII ♦ ENGINEERING CODE AT6801

OBJECTIVES

THE MAIN OBJECTIVE OF THIS COURSE IS TO IMPART KNOWLEDGE IN THE CONSTRUCTION OF VEHICLE, AERODYNAMIC, CONCEPT, PANELING OF PASSENGER CAR BODY TRIM. AT THE END OF THE COURSE THE STUDENT WILL BE WELL VERSED IN THE DESIGN AND CONSTRUCTION OF EXTERNAL BODY OF THE VEHICLES.

COURSE CONTENTS

UNIT I CAR BODY DETAILS.
UNIT II BUS BODY DETAILS.
UNIT III COMMERCIAL VEHICLE DETAILS.
UNIT IV VEHICLE AERODYNAMICS.
UNIT V BODY MATERIALS, TRIM, MECHANISMS AND BODY REPAIR

COURSE OUTCOMES

KNOW ABOUT DIFFERENT ASPECTS OF CAR BODY AND BUS BODY, TYPES, COMMERCIAL VEHICLE.
ROLE OF VARIOUS AERODYNAMIC FORCES AND MOMENTS, MEASURING INSTRUMENTS
KNOW ABOUT THE MATERIAL USED IN BODY BUILDING, TOOLS USED, BODY REPAIRS.

REFERENCE BOOKS

1. POWLOSKI, J., "VEHICLE BODY ENGINEERING", BUSINESS BOOKS LTD., 1998.
2. JAMES E DUFFY, "BODY REPAIR TECHNOLOGY FOR 4-WHEELERS", CENGAGE LEARNING, 2009.
-------------------
1. GILES, G.J., "BODY CONSTRUCTION AND DESIGN", ILLIFFE BOOKS BUTTERWORTH & CO., 1991.
2. JOHN FENTON, "VEHICLE BODY LAYOUT AND ANALYSIS", MECHANICAL ENGG. PUBLICATION LTD., LONDON, 1992.
3. BRAITHWAITE, J.B., "VEHICLE BODY BUILDING AND DRAWING", HEINEMANN EDUCATIONAL BOOKS LTD., LONDON, 1997.
4. DIELER ANSELM., THE PASSENGER CAR BODY, SAE INTERNATIONAL, 2000
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

XI. NOISE, VIBRATION AND HARSHNESS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ NOISE, VIBRATION AND HARSHNESS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VI ELECTIVE – I ♦ ENGINEERING CODE AT6003

OBJECTIVES

KNOWLEDGE IN BASIC OF VIBRATION AND NOISE
UNDERSTANDING THE EFFECT OF NOISE AN HUMAN COMFORT AND ENVIRONMENT
KNOWING THE METHODS OF VIBRATION AND NOISE MEASUREMENT.

COURSE CONTENTS

UNIT I FUNDAMENTALS OF ACOUSTICS AND NOISE, VIBRATION.
UNIT II EFFECTS OF NOISE, BLAST, VIBRATION, AND SHOCK ON PEOPLE.
UNIT III TRANSPORTATION NOISE AND VIBRATION—SOURCES, PREDICTION, AND CONTROL.
UNIT IV INTERIOR TRANSPORTATION NOISE AND VIBRATION SOURCES – PREDICTION AND CONTROL.
UNIT V NOISE AND VIBRATION TRANSDUCERS, ANALYSIS EQUIPMENT, SIGNAL PROCESSING, AND MEASURING TECHNIQUES.

COURSE OUTCOMES

AT THE END OF THE COURSE, THE STUDENT WILL UNDERSTAND THE SOURCES, EFFECTS, PREDICTION, CONTROL TECHNIQUES, MEASUREMENT TECHNIQUES OF NOISE, VIBRATION PERTAIN TO AN AUTOMOBILE.

REFERENCE BOOKS

1. CLARENCE W. DE SILVA , “VIBRATION MONITORING, TESTING, AND INSTRUMENTATION “,CRC PRESS, 2007 79
2. DAVID A.BIES AND COLIN H.HANSEN “ENGINEERING NOISE CONTROL: THEORY AND PRACTICE “SPON PRESS, LONDON, 2009
---------------------
1. ALLAN G. PIERSOL ,THOMAS L. PAEZ “HARRIS’ SHOCK AND VIBRATION HANDBOOK” , MCGRAW-HILL NEW DELHI, 2010
2. COLIN H HANSEN “UNDERSTANDING ACTIVE NOISE CANCELLATION“ , SPON PRESS , LONDON 2003
3. MATTHEW HARRISON “VEHICLE REFINEMENT: CONTROLLING NOISE AND VIBRATION IN ROAD VEHICLES “,ELSEVIER BUTTERWORTH-HEINEMANN, BURLINGTON, 2004
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

 AUTOMOBILE ENGINEERING

XII. DESIGN OF JIGS, FIXTURES AND PRESS TOOLS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ DESIGN OF JIGS, FIXTURES AND PRESS TOOLS

♦  AUTOMOBILE ENGINEERING ♦ SEMESTER VII ELECTIVE – II ♦ ENGINEERING CODE ME6006

OBJECTIVES

TO UNDERSTAND THE FUNCTIONS AND DESIGN PRINCIPLES OF JIGS, FIXTURES AND PRESS TOOLS
TO GAIN PROFICIENCY IN THE DEVELOPMENT OF REQUIRED VIEWS OF THE FINAL DESIGN.

COURSE CONTENTS

UNIT I LOCATING AND CLAMPING PRINCIPLES.
UNIT II JIGS AND FIXTURES.
UNIT III PRESS WORKING TERMINOLOGIES AND ELEMENTS OF CUTTING DIES.
UNIT IV BENDING AND DRAWING DIES.
UNIT V OTHER FORMING TECHNIQUES.

COURSE OUTCOMES

UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO DESIGN JIGS, FIXTURES AND PRESS TOOLS.

REFERENCE BOOKS

1. JOSHI, P.H. “JIGS AND FIXTURES”, SECOND EDITION, TATA MCGRAW HILL PUBLISHING CO., LTD., NEW
DELHI, 2004.
2. JOSHI P.H “PRESSTOOLS - DESIGN AND CONSTRUCTION”, WHEELS PUBLISHING, 1996
REFERENCES:
1. VENKATARAMAN. K., “DESIGN OF JIGS FIXTURES & PRESS TOOLS”, TATA MCGRAW HILL, NEW DELHI, 2005.
2. DONALDSON, LECAIN AND GOOLD “TOOL DESIGN”, III RD EDITION TATA MCGRAW HILL, 2000.
3. KEMPSTER, “JIGS AND FIXTURE DESIGN”, HODDES AND STOUGHTON – THIRD EDITION 1974.
4. HOFFMAN “JIGS AND FIXTURE DESIGN”, THOMSON DELMAR LEARNING, SINGAPORE, 2004.
5. ASTME FUNDAMENTALS OF TOOL DESIGN PRENTICE HALL OF INDIA.
6. DESIGN DATA HAND BOOK, PSG COLLEGE OF TECHNOLOGY, COIMBATORE, KALAIKATHIR ACHCHAGAM, 2011.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

MARINE ENGINEERING

I. MECHANICS OF MARINE MACHINES 

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MECHANICS OF MARINE MACHINES 

♦  MARINE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE MV6505 

OBJECTIVES

TO IMPART THEORETICAL KNOWLEDGE ABOUT MECHANISM OF MACHINERY, BALANCING AND VIBRATION OF MACHINES AND ASSOCIATED SYSTEM COMPONENTS AND EQUIPMENT, 

COURSE CONTENTS

UNIT I MECHANISMS.
UNIT II THEORY OF GEARING.
UNIT III CONTROL MECHANISMS.
UNIT IV BALANCING. 
UNIT V VIBRATION 

COURSE OUTCOMES

 VELOCITY AND ACCELERATION OF VARIOUS KINEMATIC LINKAGES 
 FOUR BAR AND SLIDER CRANK MECHANISMS USING ANALYTICAL AND GRAPHICAL METHODS. 
 FORCE ANALYSIS OF MECHANISMS AND TURNING MOMENT DIAGRAMS AND FLYWHEEL. 
 VARIOUS PARAMETERS OF GEARS AND GEAR TRAINS. 
 GOVERNORS AND GYROSCOPES. 
 CONCEPT OF BALANCING. 
 FREE AND FORCED VIBRATION OF SINGLE DEGREE OF FREEDOM SYSTEMS. TWO AND MULTI DEGREE FREEDOM SYSTEMS. 

REFERENCE BOOKS

1. RATTAN S.S, „‟THEORY OF MACHINES‟‟, TATA MCGRAW-HILL PUBLISHING COMPANY LTD., NEW DELHI, 1998. 
2. GORDON JOHN ROY, “STEAM TURBINES AND GEARING MARINE ENGINEERING SERIES”, 1ST ED., STANFORD MARITIME LIMITED, 1984 
3. SANDHU SINGH, “ THEORY OF MACHINES”, 3RD ED., PEARSON, 2012 
4. RAO, J.S., AND DUKKIPATTI, R.V., “MECHANISM AND MACHINERY THEORY”, 2ND EDITION, NEW AGE INTERNATIONAL, MUMBAI, 1992. 
5. SRIKANT BHAVE, “MECHANICAL VIBRATIONS”, 1ST ED. PEARSON, 2010 
1. SHINGLEY, J.E. & JOHN JOSEPH UIVKER, JR., “THEORY OF MACHINES AND MECHANISMS”, 2ND ED., MCGRAW – HILL INTERNATIONAL EDITIONS, LONDON, 1981. 
2. GHOSH A. AND MALIK, A.M. “THEORY OF MECHANISMS AND MACHINES”, 2ND ED., AFFILIATED EAST – WEST PRESS PVT. LTD., NEW DELHI, 1988. 
3. FRANCIS. TSE. IVAN E-MORSE ROLLAND T. HINKLE, “MECHANICAL VIBRATIONS”, 2ND ED., CBS PUBLISHERS AND DISTRIBUTED, INDIA, 1983. 
4. THOMSON,W.T. AND DAHLEH,M.D., “THEORY OF VIBRATION WITH APPLICATIONS” 5TH ED., PEARSON, 2005 
5 GROVER.G.K., “MECHANICAL VIBRATIONS”, 7TH EDITION, NEM CHAND & BROS, ROORKEE, INDIA, 2001. 
6 THOMAS BEVAN, “THEORY OF MACHINES”, 1ST ED. PEARSON, 2011 MV6506 
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

MARINE ENGINEERING

II. COMPUTER AIDED MARINE ENGINEERING DESIGN AND ANALYSIS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ COMPUTER AIDED MARINE ENGINEERING DESIGN AND ANALYSIS 

♦  MARINE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE MV6501 

OBJECTIVES

TO IMPART PRACTICAL KNOWLEDGE TO THE STUDENTS ABOUT COMPUTER AIDED DESIGN AND DRAWING OF MARINE MACHINE ELEMENTS 

COURSE CONTENTS

UNIT I ENGINEERING DESIGN AND COMPUTER AIDED DESIGN.
UNIT II COMPUTER AIDED DESIGN AND FINITE ELEMENT ANALYSIS.
UNIT III TYPES OF LOADING AND DESIGN CRITERIA.
UNIT IV JOINTS, SHAFTS AND COUPLINGS.
UNIT V BELTS, FRICTION CLUTCHES AND BRAKES 

COURSE OUTCOMES

 DESIGN CONCEPT, SELECTION OF MATERIALS AND MANUFACTURING CONSIDERATIONS WHILE DESIGNING. 
 COMPUTER AIDED DESIGN CONCEPTS AND APPLICATIONS 
 DESIGN AND DRAWING OF FASTENERS AND CONNECTION AND POWER TRANSMISSION ELEMENTS. 
 DESIGN AND DRAWING OF FRICTION CLUTCHES AND BRAKES. 

REFERENCE BOOKS

1. GOUTAM PROHIT AND GOUTAM GHOSH,”MACHINE DRAWING WITH AUTOCAD”, 1ST IMPRESSION, DORLING KINDERSLEY(INDIA) PVT., LTD., NEW DELHI,2007IST 
2. J.E.SHIGLEY, “MECHANICAL ENGINEERING DESIGN”, 1ST METRIC EDITION, MCGRAW-HILL, NEW DELHI, 1986. 
3. SADHU SINGH, "COMPUTER AIDED DESIGN AND MANUFACTURING ", KHANNA PUBLISHERS, NEW DELHI, 1998. 
4. DESAI, Y.M.,ELDHO,T.I. AND SHAH,A.H., “ FINITE ELEMENT METHOD WITH APPLICATIONS IN ENGINEERING”, 1ST ED., PEARSON, 2011 
REFERENCES: 
1. ABDULLA SHARIF, “MACHINE DESIGN”, 3RD EDITION, DHANPAT ROY & SONS, NEW DELHI, 1995. 
2. PANDYA & SHAW, “ELEMENTS OF MACHINE DESIGN”, 1ST EDITION, CHAROTAR PUBLISHING, MUMBAI, 1997. 
3. GROOVER AND ZIMMERS, " CAD / CAM : COMPUTER AIDED DESIGN AND MANUFACTURING ",PRENTICE HALL OF INDIA, NEW DELHI, 1994. 
4. R.S.KHURMI AND J.K.GUPTA, “MACHINE DESIGN”, 5TH EDITION, EURASIA PUBLISHING, NEW DELHI, 2005. 
5. TIRUPATHI R. CHANDRUPATLA, “ FINITE ELEMENT ANALYSIS FOR ENGINEERING AND TECHNOLOGY”, 1 ST ED., UNIVERSITIES PRESS, 2013 
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

MARINE ENGINEERING

III. MARINE SYSTEMS AND MACHINERY DESIGN 

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MARINE SYSTEMS AND MACHINERY DESIGN 

♦  MARINE ENGINEERING ♦ SEMESTER VII ♦ ENGINEERING CODE MV6701

OBJECTIVES

TO IMPART TRAINING AND KNOWLEDGE TO THE STUDENTS ABOUT MARINE MACHINERY SYSTEM AND DESIGN. 

COURSE CONTENTS

UNIT I SLIDING AND ROLLING CONTACT BEARINGS.
UNIT II SPUR , HELICAL BEVEL AND WORM GEARS.
UNIT III IC ENGINE PARTS.
UNIT IV VALVES & LIFTING DEVICES.
UNIT V DESIGN CRITERIA FOR MARINE SYSTEMS.

COURSE OUTCOMES

 USING DIFFERENT TYPES OF BEARINGS. 
 DESIGN OF IC ENGINE PARTS AND GEARS. 
 DESIGN OF MARINE MACHINERY SYSTEMS. 

REFERENCE BOOKS

1. JINDAL, U.C., “MACHINE DESIGN”,1ST.ED. , PEARSON, 2010 
2. LESLIE JACKSON, “INSTRUMENTATION AND CONTROL SYSTEMS”, 3RD EDITION, THOMAS REED PUBLICATION LTD., LONDON, 1992. 
3. SMITH,“APPLICATION OF AUTOMATIC MACHINERY AND ALARM EQUIPMENT IN SHIPS”, MARINE ENGINEERING PRACTICE, VOL 1,PART 06, IMAREST, LONDON 
4. PEARSON, G.H., “VALVE DESIGN”, 1ST ED., MECHANICAL ENGINEERING PUBLICATIONS”, 1978 
5. KRISHNA RAO, T., “DESIGN OF MACHINE ELEMENTS‟, 1ST ED.,VOL.2., I K INTERNATIONAL PUBLISHING HOUSE PVT. LTD., 2010 
-------------------------
1. INDIAN REGISTER OF SHIPPING PART 1 TO PART 7, “RULES AND REGULATIONS & CLASSIFICATION OF STEEL SHIPS” 1ST EDITION, MUMBAI, 1999. 
2. SAM HAD DAD, NEIL WATSON, “DESIGN AND APPLICATION IN DIESEL ENGINES”, 1ST EDITION, ELLIS HORWOOD LIMITED, LONDON, 1984. 
3. PANDYA & SHAH, “MACHINE DESIGN”, 13TH EDITION, CHAROTAR PUBLISHING HOUSE, GUJARATH, 1997. 
4. D.A. TAYLOR, “MARINE CONTROL PRACTICE”, 2ND EDITION, BUTTER WORTH & CO (PUBLISHERS) LTD., LONDON, 1987 
5. ASME STANDARD TECHNOLOGY , “ A GUIDE TO AMERICAN CRANE STANDARDS”, ASME, 2008 
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

MARINE ENGINEERING

IV. MARINE AUXILIARY MACHINERY – II  

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MARINE AUXILIARY MACHINERY – II 

♦  MARINE ENGINEERING ♦ SEMESTER VII ♦ ENGINEERING CODE MV6704 

OBJECTIVES

TO IMPART KNOWLEDGE ON THE WORKING PRINCIPLE OF MARINE AUXILIARY MACHINERIES 

COURSE CONTENTS

UNIT I OPERATION & MAINTENANCE.
UNIT II THEORY OF OIL PURIFICATION /AIR COMPRESSOR.
UNIT III METHODS OF SHAFT ALIGNMENT.
UNIT IV DRY DOCKING.
UNIT V MAINTENANCE AND REPAIR AT MANAGEMENT LEVEL, LEADERSHIP AND MANAGERIAL SKILLS 

COURSE OUTCOMES

 THE CONSTRUCTION, OPERATION, MAINTENANCE OF INCINERATOR AND SEWAGE PLANT. 
 THE CONSTRUCTION, OPERATION, MAINTENANCE OF OILY WATER SEPARATOR AND PURIFIERS 
 THE CONSTRUCTION OPERATION, MAINTENANCE OF SEWAGE PLANT. 
 ALIGNMENT OF SHAFTING SYSTEM 
 DRY DOCKING OF SHIPS 
 MAINTENANCE AND REPAIR OF EQUIPMENTS , MACHINERY FITTED IN SHIPS 

REFERENCE BOOKS

1. DW SMITH “MARINE AUXILIARY MACHINERY”, 6TH EDITION, BUTTER WORTHS,LONDON,1987. 2. HDMCGEORGE,”MARINEAUXILIARY MACHINERY"7THEDITION, BUTTER WORTHS,LONDON,2001.
--------------
1. D.K. SANYAL, “ PRINCIPLE AND PRACTICES OF MARINE DIESEL ENGINE” 2ND EDITION, BHANDARKAR PUBLICATION, MUMBAI, 1998 
2. MARPOL 73/78, IMO PUBLICATIONS , 2001. 
3. WOOD YARD , DOUG, “POUNDER”S MARINE DIESEL ENGINE” 7THEDITION, BUTTER WORTHS HEINEMANN PUBLICATIONS ,LONDON 2001 
4. “ PUMPING AND PIPING DIAGRAM”, IME PUBLICATION 
5. HEINZ P. BLOCH, FRED K. GEITNER, “MACHINERY COMPONENT MAINTENANCE AND REPAIR” 3RD ED. AN IMPRINT OF ELSEVIER, 2010 
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

I. STRENGTH OF MATERIALS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ STRENGTH OF MATERIALS

♦  AGRICULTURE ENGINEERING ♦ SEMESTER III ♦ ENGINEERING CODE CE6306

OBJECTIVES

TO UNDERSTAND THE STRESSES DEVELOPED IN BARS, COMPOUNDS BARS, BEAMS, SHAFTS, CYLINDERS AND SPHERES.

COURSE CONTENTS

UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS.
UNIT II TRANSVERSE LOADING ON BEAMS AND STRESSES IN BEAM.
UNIT III TORSION.
UNIT IV DEFLECTION OF BEAMS.
UNIT V THIN CYLINDERS, SPHERES AND THICK CYLINDERS

COURSE OUTCOMES

 UPON COMPLETION OF THIS COURSE, THE STUDENTS CAN ABLE TO APPLY MATHEMATICAL KNOWLEDGE TO CALCULATE THE DEFORMATION BEHAVIOR OF SIMPLE STRUCTURES.
 CRITICALLY ANALYSE PROBLEM AND SOLVE THE PROBLEMS RELATED TO MECHANICAL ELEMENTS AND ANALYSE THE DEFORMATION BEHAVIOR FOR DIFFERENT TYPES OF LOADS.

REFERENCE BOOKS

1. BANSAL, R.K., "STRENGTH OF MATERIALS", LAXMI PUBLICATIONS (P) LTD., 2007
2. JINDAL U.C., "STRENGTH OF MATERIALS", ASIAN BOOKS PVT. LTD., NEW DELHI, 2007
----------------------
1. EGOR. P.POPOV “ENGINEERING MECHANICS OF SOLIDS” PRENTICE HALL OF INDIA, NEW DELHI, 2001
2. SUBRAMANIAN R., "STRENGTH OF MATERIALS", OXFORD UNIVERSITY PRESS, OXFORD HIGHER EDUCATION SERIES, 2007.
3. HIBBELER, R.C., "MECHANICS OF MATERIALS", PEARSON EDUCATION, LOW PRICE EDITION, 2007
4. FERDINAND P. BEEN, RUSSELL JOHNSON, J.R. AND JOHN J. DEWOLE "MECHANICS OF MATERIALS", TATA
MCGRAW HILL PUBLISHING ‘CO. LTD., NEW DELHI, 2005.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

II. THEORY OF MACHINES

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ THEORY OF MACHINES

♦  AGRICULTURE ENGINEERING ♦ SEMESTER III ♦ ENGINEERING CODE AI6304

OBJECTIVES

TO INTRODUCE THE STUDENTS THE THEORY OF MACHINES PERTAINING TO AGRICULTURAL ENGINEERING

COURSE CONTENTS

UNIT I TERMINOLOGY.
UNIT II FRICTION AND APPLICATIONS.
UNIT III MOTION OF CAM AND FOLLOWER.
UNIT IV GEARS AND GEAR TRAINS.
UNIT V FLYWHEEL AND BALANCING

COURSE OUTCOMES

BASIC KNOWLEDGE ON THE FRICTION APPLICATIONS, GEAR AND GEAR TRAINS.
LEARN THE FUNDAMENTALS RELATED TO MOTION OF CAM AND FOLLOWER AND FLY WHEEL BALANCING

REFERENCE BOOKS

1. RATTAN, S.S, THEORY OF MACHINES, 3RD EDITION, TATA MCGRAW-HILL, 2009.
2. KHURMI, R.S. AND GUPTA, J.K, THEORY OF MACHINES, EURASIA PUBLICATION HOUSE, 1994.
-----------------------
1. THOMAS BEVEN, THEORY OF MACHINES, CBS PUBLISHERS AND DISTRIBUTORS, NEW DELHI, 1984.
2. BALLANEY, P.L, THEORY OF MACHINES, KHANNA PUBLISHERS, NEW DELHI,1994
3. HTTP://WWW.SOFTINTEGRATION.COM/CHHTML/TOOLKIT/MECHANISM/
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

III. TRACTOR AND POWER UNITS

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ TRACTOR AND POWER UNITS

♦  AGRICULTURE ENGINEERING ♦ SEMESTER IV ♦ ENGINEERING CODE AI6402

OBJECTIVES

TO INTRODUCE THE STUDENTS TO THE DIFFERENT SYSTEMS AND WORKING PRINCIPLES OF TRACTOR, POWER TILLER, MAKES OF TRACTORS AND POWER TILLERS.

COURSE CONTENTS

UNIT I TRACTORS.
UNIT II ENGINE SYSTEMS.
UNIT III TRANSMISSION SYSTEMS.
UNIT IV HYDRAULIC SYSTEMS.
UNIT V POWER TILLER AND TRACTOR TESTING

COURSE OUTCOMES

THE STUDENTS WILL BE ABLE TO UNDERSTAND THE VARIOUS EQUIPMENTS AND MECHANIZATIONS USED IN THE FARM.
THE STUDENTS WILL HAVE THE KNOWLEDGE ON EARTH MOVING MACHINERIES, TRACTOR CLASSIFICATION AND TILLAGE IMPLEMENTS.

REFERENCE BOOKS

 JAIN, S.C. AND C.R. RAI. FARM TRACTOR MAINTENANCE AND REPAIR. STANDARD PUBLISHERS AND DISTRIBUTORS, NEW DELHI, 1999.
-------------------------
1. BARGER, E.L., J.B. LILJEDAHL AND E.C. MCKIBBEN, TRACTORS AND THEIR POWER UNITS. WILEY EASTERN PVT. LTD., NEW DELHI, 1997.
2. DOMKUNDWAR A.V. A COURSE IN INTERNAL COMBUSTION ENGINES. DHANPAT RAI & CO. (P) LTD., EDUCATIONAL AND TECHNICAL PUBLISHERS, DELHI,1999.
3. BLACK, P.O. DIESEL ENGINE MANUAL. TARAPOREVALA SONS& CO., MUMBAI, 1996.
4. GROUSE, W.H. AND ANGLIN, D.L. AUTOMOTIVE MECHANICS. MACMILLAN MCGRAW- HILL, SINGAPORE, INDIAN STANDARD CODES FOR AGRICULTURAL IMPLEMENTS PUBLISHED BY ISI, NEW DELHI, 1993.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

IV.FARM EQUIPMENT

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ FARM EQUIPMENT

♦  AGRICULTURE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE AI6503

OBJECTIVES

TO INTRODUCE THE STUDENTS TO THE WORKING PRINCIPLES OF FARM EQUIPMENTS, TILLAGE IMPLEMENTS.
TO EXPOSE THE STUDENTS TO FARM MECHANIZATION BENEFITS AND CONSTRAINTS, IDENTIFICATION OF COMPONENTS OF PRIMARY AND SECONDARY TILLAGE IMPLEMENTS

COURSE CONTENTS

UNIT I FARM MECHANIZATION. 
UNIT II PRIMARY AND SECONDARY TILLAGE IMPLEMENTS.
UNIT III SOWING AND FERTILIZING EQUIPMENT.
UNIT IV WEEDING AND PLANT PROTECTION EQUIPMENT.
UNIT V HARVESTING MACHINERY

COURSE OUTCOMES

THE STUDENTS WILL BE ABLE TO UNDERSTAND THE MECHANIZATION AND VARIOUS EQUIPMENT USED IN THE FARM FOR DIFFERENT FIELD OPERATIONS.

REFERENCE BOOKS

1. JAGDISHWAR SAHAY. ELEMENTS OF AGRICULTURAL ENGINEERING. STANDARD PUBLISHERS DISTRIBUTORS, DELHI 6.,2010.
2. MICHAEL AND OHJA. PRINCIPLES OF AGRICULTURAL ENGINEERING. JAIN BROTHERS, NEW DELHI., 2005
---------------------
1. KEPNER, R.A., ET AL. PRINCIPLES OF FARM MACHINERY. CBS PUBLISHERS AND DISTRIBUTERS, DELHI. 99, 1997.
2. HARRIS PEARSON SMITH ET AL. FARM MACHINERY AND EQUIPMENT. TATA MCGRAW-HILL PUB., NEW DELHI.,1996.
3. SRIVASTAVA, A.C. ELEMENTS OF FARM MACHINERY. OXFORD AND IBH PUB. CO., NEW DELHI, 1990.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

V. DESIGN OF AGRICULTURAL MACHINERY

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ DESIGN OF AGRICULTURAL MACHINERY

♦  AGRICULTURE ENGINEERING ♦ SEMESTER V ♦ ENGINEERING CODE AI6504

OBJECTIVES

TO INTRODUCE TO THE STUDENTS TO THE BASIC CONCEPTS OF DESIGN OF AGRICULTURAL MACHINERIES.
TO GET THROUGH THE DETAILED DESIGN & DRAWING OF VARIOUS COMPONENTS OF AGRICULTURAL MACHINERIES.

COURSE CONTENTS

UNIT I STRESSES IN MACHINE MEMBERS.
UNIT II DESIGN OF POWER TRANSMISSION SYSTEMS.
UNIT III DESIGN OF SHAFTS AND COUPLINGS.
UNIT IV DESIGN OF ENERGY STORING ELEMENTS.
UNIT V DESIGN OF GEARS AND BEARINGS.

COURSE OUTCOMES

AT THE END OF THE COURSE THE STUDENT WILL HAVE THE KNOWLEDGE ON AGRICULTURAL MACHINERIES AND DETAILED DESIGN AND DRAWING OF VARIOUS COMPONENTS

REFERENCE BOOKS

1. KHURMI R.S AND GUPTA J.K, A TEXTBOOK OF MACHINE DESIGN, EUARSIA PUBLICATION HOUSE, 2005.
2. BHANDARI V.B, “DESIGN OF MACHINE ELEMENTS”, TATA MCGRAW-HILL BOOK CO, 2003.
-------------------
1. NORTON R.L, MACHINE DESIGN – AN INTEGRATED APPROACH, PEARSON PUBLICATIONS, 3RD EDITION, 2006.
2. SRIVASTAVA A.K., GOERING.C.E. AND ROHRBACH R.P. ENGINEERING PRINCIPLES OF AGRICULTURAL MACHINES. REVISED PRINTING BY AMERICAN SOCIETY OF AGRICULTURAL ENGINEERS. 1993.
3. GARY KRUTZ, LESTER THOMPSON AND PAUL CLEAR., “DESIGN OF AGRICULTURAL MACHINERY”, JOHN WILEY AND SONS, NEW YORK, 1984.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

VI. FARM POWER AND MACHINERY MANAGEMENT

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ FARM POWER AND MACHINERY MANAGEMENT

♦  AGRICULTURE ENGINEERING ♦ ELECTIVE - IV ♦ ENGINEERING CODE AI6011

OBJECTIVES

TO ACQUAINT AND EQUIP WITH THE LATEST DESIGN PROCEDURES OF FARM POWER AND MACHINERY SYSTEMS.
TO PROVIDE SUFFICIENT KNOWLEDGE OF MECHANIZATION STATUS IN THE COUNTRY AND MANAGEMENT TECHNIQUES FOR FUTURE REQUIREMENTS.

COURSE CONTENTS

UNIT I INTRODUCTION TO FARM POWER AND DESIGN CRITERIA.
UNIT II MACHINERY MANAGEMENT.
UNIT III SYSTEMS APPROACH.
UNIT IV PLANNING OF MACHINERY.
UNIT V ECONOMIC ANALYSIS.

COURSE OUTCOMES

THE STUDENTS WILL BE ABLE TO UNDERSTAND THE CONCEPTS OF BIO ENERGY SOURCES AND ITS APPLICATIONS.

REFERENCE BOOKS

1. BAINER, R. KEPNER, R.A. AND BARGER, E.L. 1978. PRINCIPLES OF FARM MACHINERY. JOHN WILEY AND SONS. NEW YORK.
2. LILJEDAHL, B: TUMQUIST, PK: SMITH, DW; AND HOKI, M. 1989. TRACTOR AND ITS POWER UNITS. VAN NOSTRAND REINHOLD
3. CULPIN, C. 1978. FARM MACHINERY. GRANADA PUBLISHING LTD., LONDON.
4. KEPNER, R.A., BAINER, R. AND BARGER, E.L. 1987. PRINCIPLES OF FARM MACHINERY. C.S.B. PUBLISHERS AND DISTRIBUTORS, NEW DELHI.
5. SMITH, H.P. AND WILKES, L.H. 1979. FARM MACHINERY AND EQUIPMENT. TATA MCGRAW-HILL PUBLISHING CO. LTD., NEW DELHI.
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

VII. MECHANICS OF TILLAGE AND TRACTION

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ MECHANICS OF TILLAGE AND TRACTION

♦  AGRICULTURE ENGINEERING ♦ ELECTIVE - IV ♦ ENGINEERING CODE AI6012

OBJECTIVES

TO IMPART THE FUNDAMENTAL KNOWLEDGE OF MECHANICS AND DYNAMICS IN VARIOUS TILLAGE IMPLEMENTS
TO STUDY THE TYRES, TRACTION AND ITS APPLICATIONS

COURSE CONTENTS

UNIT I MECHANICS OF TILLAGE.
UNIT II DYNAMICS OF TILLAGE.
UNIT III TRACTION.
UNIT IV TYRES.
UNIT V APPLICATIONS

COURSE OUTCOMES

AFTER COMPLETION OF THE COURSE, THE STUDENTS WILL BE ABLE TO UNDERSTAND THE CONCEPTS OF MECHANICS, DYNAMICS AND TRACTION OF IMPLEMENTS AND THEIR APPLICATIONS

REFERENCE BOOKS

1. KLENIN, N.L.; POPOV, I.F. AND V.A. SAKUM, (1985). AGRICULTURAL MACHINES. AMERIND PUB. CO. NEWYORK
2. J. B. LILJEDAHL, P. K. TURNQUIST, D. W. SMITH, & M. HOKI , 1996. TRACTORS AND THEIR POWER UNITS. FOURTH ED. AMERICAN SOCIETY OF AGRICULTURAL ENGINEERS, ASAE
3. KEPNER, R. A., ROY BAINER AND E. L. BARGER. 1978. PRINCIPLES OF FARM MACHINERY. THIRD EDITION; AVI PUBLISHING COMPANY INC: WESTPORT, CONNECTICUT.
--------------------------
1. RALPH ALCOCK.1986. TRACTOR IMPLEMENTS SYSTEM. AVI PUBL.
2. S. C. JAIN, FARM MACHINERY- AN APPROACH
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

AGRICULTURE ENGINEERING 

VIII. SPECIAL FARM EQUIPMENT

COURSE SEMESTER
OBJECTIVES
COURSE CONTENTS
COURSE OUTCOMES
REFERENCE BOOKS
APPLICATION TOOL
COURSE SEMESTER

♦ SYLLABUS PROGRAM ♦ SPECIAL FARM EQUIPMENT

♦  AGRICULTURE ENGINEERING ♦ ELECTIVE - IV ♦ ENGINEERING CODE AI6013

OBJECTIVES

TO STUDY THE SPECIAL MACHINERIES USED FOR AGRICULTURAL APPLICATIONS

COURSE CONTENTS

UNIT I WEEDING EQUIPMENT.
UNIT II SPRAYERS AND DUSTERS.
UNIT III MOWERS AND HARVESTERS.
UNIT IV THRESHERS AND OTHER MACHINERIES.
UNIT V SPECIALIZED FARM EQUIPMENT

COURSE OUTCOMES

AFTER COMPLETION OF THE COURSE, THE STUDENTS WILL HAVE A THOROUGH KNOWLEDGE ON SPECIAL FARM EQUIPMENT REQUIRED FOR VARIOUS AGRICULTURAL OPERATIONS

REFERENCE BOOKS

1. JAGDISHWAR SAHAY. 2010. ELEMENTS OF AGRICULTURAL ENGINEERING. STANDARD PUBLISHERS DISTRIBUTORS, DELHI 6.
2. MICHAEL AND OJHA. 2005. PRINCIPLES OF AGRICULTURAL ENGINEERING. JAIN BROTHERS, NEW DELHI. 85
------------------
1. KEPNER, R.A., ET AL. 1997. PRINCIPLES OF FARM MACHINERY. CBS PUBLISHERS AND DISTRIBUTERS, DELHI.
2. HARRIS PEARSON SMITH ET AL. 1996. FARM MACHINERY AND EQUIPMENTS. TATA MCGRAW-HILL PUB., NEW DELHI.
3. SRIVASTAVA, A.C. 1990. ELEMENTS OF FARM MACHINERY. OXFORD AND IBH PUB. CO., NEW DELHI
APPLICATION TOOL

♦ APM WINMACHINE CAE/CAD/STRUCTURAL ANALYSIS/FEA/MACHINE ELEMENTS/PDM/DB ♦ VARICAD 2D/3D/PDM/BOM ♦ KOMPAS 3D  2D/3D/PDM/BOM ♦ SAM MECHANISM DESIGN ♦ SALTIRE SOFTWARE MATHEMATICAL TECHNOLOGY ♦ UNIVERSAL MECHANISM MULTIBODY DYNAMICS.

» FEATURE ON APPLICATION DATA WILL BE TAKEN FROM APPLICATION TOOLS ON EITHER SIDE OF ACADEMIC AND INDUSTRY «

info@paviathintegratedsolution.com www.paviathintegratedsolution.com