3 Axis Milling

The particluarity of the 3D milling is that the tool can be moved simultaneously according 3 axes of the workpiece. In order to set these operations in SprutCAM , you need to have a 3D model of the workpiece.

Effective machining programming using models from any CAD system.


High quality of the machining - Minimizing tool expenses - Cutting down on NC program creation times - Cutting down on the machining time - Collision control

    SprutCAM has a wide variety of various strategies for the standard and hi-speed milling in order to machine the workpieces with curved forming surfaces.
    The possibility to form the toolpath taking into account the scallop’s height permanency permits to obtain a surface of the desired cleanness and quality

    Minimizing of the labor costs thanks to the automatic detection and machining of the remaining material.

    The function of the flat tool path forming permits to avoid hard modes of the machine functioning and will considerably prolong your equipment’s longevity.

    3D roughing:

    Layer by layer roughing (with a permanent level for the Z axis)
    Line by line roughing (with a set angle relatively to the X axis)
    Controlled roughing (along or across the direction curves)
    Layer by layer selection (of the round wells according to the spiral of Archimedes)
    Area selection with limiting by the minimum radius of the tool path curvature and trochoidal cutting in.

      3D finishing:

      Layer by layer finishing (with a permanent level for the Z axis)
      Finishing on flat horizontal areas (series of horizontal moves on different levels)
      Line by line finishing (with a set angle relatively to the X axis)
      Controlled finishing (along or across the direction curves)
      Complex line and layer finishing (optimization of the machining of flat and steep areas)
      Line by line optimized finishing (optimization of the machining in the direction of the areas’ slope)
      Three-dimensional finishing (optimization according to a set scallop size)
      Combined finishing (layer by layer machining with equidistant machining of flat areas)
      Machining of 3D curve
      Engraving (with a possibility of 3D angles machining)